Browse all products
MDS-2006 Rotary Servo Motor
Continuous Current (Amps)1.1
Peak Current (Amps RMS)2.6
Resistance (Ohms)3.5
Inductance (mH)1.1
Shaft Diameter (mm)4
Peak Stall Torque (mNm)40
Peak Curent (Amps RMS)2.6
Rated Stall Torque (mNm)17
Rated Current (Amps)1.1
Continuous Rated Torque (mNm)14
Torque Constant (mNm/Amps RMS)15
Rated Speed (RPM)1500
Maximum Speed (RPM)3000
Back EMF (V/kRPM)1.6
Drive Input Voltage (VDC)24
Rotor Poles10
Rotor Inertia (g-cm2)0.78
Weight (g)88
Radial Load (N)44
Axial Load (N)22
Axial Load Reference Point (mm)29.8
Absolute Encoder (BiSS-C)262,144
Shaft Length (mm)10
Heat Sink (Al mm)100 x 100 x 5
Armature Insulation ClassB
Motor Diameter (mm)21
Motor Length (mm)31.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
MDS-2012 Rotary Servo Motor
Continuous Current (Amps)1.2
Peak Current (Amps RMS)4.3
Resistance (Ohms)2.2
Inductance (mH)0.79
Shaft Diameter (mm)4
Peak Stall Torque (mNm)90
Peak Curent (Amps RMS)4.3
Rated Stall Torque (mNm)30
Rated Current (Amps)1.2
Continuous Rated Torque (mNm)26
Torque Constant (mNm/Amps RMS)24
Rated Speed (RPM)1500
Maximum Speed (RPM)3000
Back EMF (V/kRPM)2.5
Drive Input Voltage (VDC)24
Rotor Poles10
Rotor Inertia (g-cm2)1.2
Weight (g)100
Radial Load (N)44
Axial Load (N)22
Axial Load Reference Point (mm)35.7
Absolute Encoder (BiSS-C)262,144
Shaft Length (mm)10
Heat Sink (Al mm)100 x 100 x 5
Armature Insulation ClassB
Motor Diameter (mm)21
Motor Length (mm)37.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
MDS-2018 Rotary Servo Motor
Continuous Current (Amps)1.4
Peak Current (Amps RMS)5.6
Resistance (Ohms)1.9
Inductance (mH)0.82
Shaft Diameter (mm)4
Peak Stall Torque (mNm)130
Peak Curent (Amps RMS)5.6
Rated Stall Torque (mNm)40
Rated Current (Amps)1.4
Continuous Rated Torque (mNm)30
Torque Constant (mNm/Amps RMS)23
Rated Speed (RPM)1500
Maximum Speed (RPM)3000
Back EMF (V/kRPM)2.4
Drive Input Voltage (VDC)24
Rotor Poles10
Rotor Inertia (g-cm2)1.7
Weight (g)120
Radial Load (N)44
Axial Load (N)22
Axial Load Reference Point (mm)41.7
Absolute Encoder (BiSS-C)262,144
Shaft Length (mm)10
Heat Sink (Al mm)100 x 100 x 5
Armature Insulation ClassB
Motor Diameter (mm)21
Motor Length (mm)43.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
MDS-3006 Rotary Servo Motor
Continuous Current (Amps)1.8
Peak Current (Amps RMS)4.6
Resistance (Ohms)2.1
Inductance (mH)1
Shaft Diameter (mm)5
Peak Stall Torque (mNm)140
Peak Curent (Amps RMS)4.6
Rated Stall Torque (mNm)60
Rated Current (Amps)1.8
Continuous Rated Torque (mNm)44
Torque Constant (mNm/Amps RMS)26
Rated Speed (RPM)1000
Maximum Speed (RPM)1000
Back EMF (V/kRPM)2.8
Drive Input Voltage (VDC)48
Rotor Poles16
Rotor Inertia (g-cm2)6.45
Weight (g)130
Radial Load (N)94
Axial Load (N)47
Axial Load Reference Point (mm)32
Absolute Encoder (BiSS-C)524,288
Shaft Length (mm)13
Heat Sink (Al mm)120 x 120 x 8
Armature Insulation ClassB
Motor Diameter (mm)30
Motor Length (mm)31.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
MDS-3012 Rotary Servo Motor
Continuous Current (Amps)1.8
Peak Current (Amps RMS)5.6
Resistance (Ohms)2.3
Inductance (mH)1.3
Shaft Diameter (mm)5
Peak Stall Torque (mNm)280
Peak Curent (Amps RMS)5.6
Rated Stall Torque (mNm)95
Rated Current (Amps)1.8
Continuous Rated Torque (mNm)68
Torque Constant (mNm/Amps RMS)43
Rated Speed (RPM)1000
Maximum Speed (RPM)1000
Back EMF (V/kRPM)4.5
Drive Input Voltage (VDC)48
Rotor Poles16
Rotor Inertia (g-cm2)11.2
Weight (g)160
Radial Load (N)94
Axial Load (N)47
Axial Load Reference Point (mm)38
Absolute Encoder (BiSS-C)524,288
Shaft Length (mm)13
Heat Sink (Al mm)120 x 120 x 8
Armature Insulation ClassB
Motor Diameter (mm)30
Motor Length (mm)37.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
MDS-3018 Rotary Servo Motor
Continuous Current (Amps)1.7
Peak Current (Amps RMS)6.3
Resistance (Ohms)2.5
Inductance (mH)1.5
Shaft Diameter (mm)5
Peak Stall Torque (mNm)420
Peak Curent (Amps RMS)6.3
Rated Stall Torque (mNm)130
Rated Current (Amps)1.7
Continuous Rated Torque (mNm)100
Torque Constant (mNm/Amps RMS)65
Rated Speed (RPM)1000
Maximum Speed (RPM)1000
Back EMF (V/kRPM)6.8
Drive Input Voltage (VDC)48
Rotor Poles16
Rotor Inertia (g-cm2)15.9
Weight (g)180
Radial Load (N)94
Axial Load (N)47
Axial Load Reference Point (mm)43.9
Absolute Encoder (BiSS-C)524,288
Shaft Length (mm)13
Heat Sink (Al mm)120 x 120 x 8
Armature Insulation ClassB
Motor Diameter (mm)30
Motor Length (mm)43.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
MDS-4006 Rotary Servo Motor
Continuous Current (Amps)1.6
Peak Current (Amps RMS)6.3
Resistance (Ohms)2.6
Inductance (mH)2.6
Shaft Diameter (mm)6
Peak Stall Torque (mNm)330
Peak Curent (Amps RMS)6.3
Rated Stall Torque (mNm)120
Rated Current (Amps)1.6
Continuous Rated Torque (mNm)100
Torque Constant (mNm/Amps RMS)58
Rated Speed (RPM)450
Maximum Speed (RPM)450
Back EMF (V/kRPM)6.1
Drive Input Voltage (VDC)48
Rotor Poles16
Rotor Inertia (g-cm2)23.3
Weight (g)210
Radial Load (N)140
Axial Load (N)70
Axial Load Reference Point (mm)37.7
Absolute Encoder (BiSS-C)1,048,576
Shaft Length (mm)16
Heat Sink (Al mm)150 x 150 x 8
Armature Insulation ClassB
Motor Diameter (mm)40
Motor Length (mm)31.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
MDS-4012 Rotary Servo Motor
Continuous Current (Amps)1.7
Peak Current (Amps RMS)7.5
Resistance (Ohms)2.5
Inductance (mH)3
Shaft Diameter (mm)6
Peak Stall Torque (mNm)700
Peak Curent (Amps RMS)7.5
Rated Stall Torque (mNm)200
Rated Current (Amps)1.7
Continuous Rated Torque (mNm)160
Torque Constant (mNm/Amps RMS)96
Rated Speed (RPM)450
Maximum Speed (RPM)450
Back EMF (V/kRPM)10
Drive Input Voltage (VDC)48
Rotor Poles16
Rotor Inertia (g-cm2)39.1
Weight (g)260
Radial Load (N)140
Axial Load (N)70
Axial Load Reference Point (mm)43.7
Absolute Encoder (BiSS-C)1,048,576
Shaft Length (mm)16
Heat Sink (Al mm)150 x 150 x 8
Armature Insulation ClassB
Motor Diameter (mm)40
Motor Length (mm)37.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
MDS-4018 Rotary Servo Motor
Continuous Current (Amps)2.3
Peak Current (Amps RMS)10
Resistance (Ohms)1.7
Inductance (mH)2
Shaft Diameter (mm)6
Peak Stall Torque (mNm)1000
Peak Curent (Amps RMS)10
Rated Stall Torque (mNm)280
Rated Current (Amps)2.3
Continuous Rated Torque (mNm)230
Torque Constant (mNm/Amps RMS)100
Rated Speed (RPM)450
Maximum Speed (RPM)450
Back EMF (V/kRPM)11
Drive Input Voltage (VDC)48
Rotor Poles16
Rotor Inertia (g-cm2)54.9
Weight (g)300
Radial Load (N)140
Axial Load (N)70
Axial Load Reference Point (mm)49.6
Absolute Encoder (BiSS-C)1,048,576
Shaft Length (mm)16
Heat Sink (Al mm)150 x 150 x 8
Armature Insulation ClassB
Motor Diameter (mm)40
Motor Length (mm)43.5
Environmental Operating0°C - 40°C, 10% - 85% relative humidity (Non-condensing)
Environmental Non-operating-20°C to 60°C
NPMC6045A-4104C Board Level Controller
RoHSYes
Axis Count4
Maximum Output Frequency (pps)6.5M
Package TypeBoard Level
Interpolation OptionLinear, Cicular, Continuous
Power Supply Voltage5 Vdc +-5%, 24 Vdc +- 5%
Encoder InputA, B, and Index per axis
CPU InterfacePC/104 bus (16 bit)
Speed Multiplicaion Rate0.1x to 100x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range-134,217,728 to +134,217,727 (28 bit)
Ramp Down Range0 - 16,777,215 pulses
Serial Bus Pulse ControlPCL6045BL
Depth (mm)95.9
Height (mm)23
PCD2112A Chip Level Controller
RoHSYes
Axis Count1
Maximum Output Frequency (pps)5M
Package Type48-pin QFP
Interpolation OptionNone
Power Supply Voltage3.3 Vdc +/-10%
CPU InterfaceSPI
Chip DesignCMOS
Speed Multiplicaion Rate0.5x to 300x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range0 - 268,435,455 (28 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size7.0 x 7.0 mm
PCD4611A Chip Level Controller
RoHSYes
Axis Count1
Maximum Output Frequency (pps)5M
Package Type48-pin QFP
Interpolation OptionNone
Power Supply Voltage3.3 Vdc +/-10%
CPU Interface8/16 bit Bus or SPI
Chip DesignCMOS
Speed Multiplicaion Rate1x to 300x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range0 - 16,777,215 (24 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size7.0 x 7.0 mm
PCD4621A Chip Level Controller
RoHSYes
Axis Count2
Maximum Output Frequency (pps)5M
Package Type64-pin QFP
Interpolation OptionNone
Power Supply Voltage3.3 Vdc +/-10%
CPU Interface8/16 bit Bus or SPI
Chip DesignCMOS
Speed Multiplicaion Rate1x to 300x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range0 - 16,777,215 (24 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size10.0 x 10.0 mm
PCD4641A Chip Level Controller
RoHSYes
Axis Count4
Maximum Output Frequency (pps)5M
Package Type100-pin QFP
Interpolation OptionNone
Power Supply Voltage3.3 Vdc +/-10%
CPU Interface8/16 bit Bus or SPI
Chip DesignCMOS
Speed Multiplicaion Rate1x to 300x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range0 - 16,777,215 (24 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size14.0 x 14.0 mm
PCL6025B Chip Level Controller
RoHSYes
Axis Count2
Maximum Output Frequency (pps)6.5M
Package Type128-pin QFP
Interpolation OptionLinear, Cicular, Continuous
Power Supply Voltage5 Vdc, 3.3 VDc, +/-10%
Encoder InputA, B, and Index per axis
CPU Interface8/16 bit Bus
Chip DesignCMOS
Speed Multiplicaion Rate0.1x to 100x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range-134,217,728 to +134,217,727 (28 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size20.0 x 14.0 mm
PCL6045BL Chip Level Controller
RoHSYes
Axis Count4
Maximum Output Frequency (pps)6.5M
Package Type176-pin QFP
Interpolation OptionLinear, Cicular, Spiral/Helical,Continuous
Power Supply Voltage3.3 Vdc +/-10%
Encoder InputA, B, and Index per axis
CPU Interface8/16 bit Bus
Chip DesignCMOS
Speed Multiplicaion Rate0.1x to 100x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range-134,217,728 to +134,217,727 (28 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size24.0 x 24.0 mm
PCL6046 Chip Level Controller
RoHSYes
Axis Count4
Maximum Output Frequency (pps)10.0M
Package Type208-pin TFBGA
Interpolation OptionLinear, Cicular, Spiral/Helical,Continuous
Power Supply Voltage3.3 Vdc +/-10%
Encoder InputA, B, and Index per axis
CPU Interface8/16 bit Bus
Chip DesignCMOS
Speed Multiplicaion Rate0.1x to 152.5x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range-2,147,483,648 to +2,147,483,647 (32 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size12.0 x 12.0 mm
PCL6115 Chip Level Controller
RoHSYes
Axis Count1
Maximum Output Frequency (pps)9.8M
Package Type80-Pin QFP
Interpolation OptionLinear, Continuous
Power Supply Voltage3.3 Vdc +/-10%
Encoder InputA, B, and Index per axis
CPU Interface8/16 bit Bus or SPI
Chip DesignCMOS
Speed Multiplicaion Rate0.3x to 600x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range-2,147,483,648 to +2,147,483,647 (32 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size12.0 x 12.0 mm
PCL6125 Chip Level Controller
RoHSYes
Axis Count2
Maximum Output Frequency (pps)9.8M
Package Type128-pin QFP
Interpolation OptionLinear, Continuous
Power Supply Voltage3.3 Vdc +/-10%
Encoder InputA, B, and Index per axis
CPU Interface8/16 bit Bus or SPI
Chip DesignCMOS
Speed Multiplicaion Rate0.3x to 600x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range-2,147,483,648 to +2,147,483,647 (32 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size14.0 x 14.0 mm
PCL6145 Chip Level Controller
RoHSYes
Axis Count4
Maximum Output Frequency (pps)9.8M
Package Type176-pin QFP
Interpolation OptionLinear, Continuous
Power Supply Voltage3.3 Vdc +/-10%
Encoder InputA, B, and Index per axis
CPU Interface8/16 bit Bus or SPI
Chip DesignCMOS
Speed Multiplicaion Rate0.3x to 600x
Acceleration Rate1 to 65535 (16 bit)
Deceleration Rate1 to 65535 (16 bit)
Position Pulse Range-2,147,483,648 to +2,147,483,647 (32 bit)
Ramp Down Range0 - 16,777,215 pulses
Mold Section Size24.0 x 24.0 mm
PF25-24C1 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )120
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)12.5
Rated Current (mAmps/Phase)104
Phase Inductance (mH +/-20%)30
Magnet MaterialFerrite Anisotropic
StackStandard
Coil WindingUnipolar
Step Angle Degrees15°
Resolution Steps/Rev24
Starting Pulse Rate (pps)490
Slewing Pulse Rate (pps)850
Holding Torque (mNm +/-12%)8
PF25-24C4 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )120
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)12.5
Rated Current (mAmps/Phase)104
Phase Inductance (mH +/-20%)26.4
Magnet MaterialNeodynium
StackStandard
Coil WindingUnipolar
Step Angle Degrees15°
Resolution Steps/Rev24
Starting Pulse Rate (pps)490
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)9
PF25-24D1 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )16
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)4.6
Rated Current (mAmps/Phase)288
Phase Inductance (mH +/-20%)4.1
Magnet MaterialFerrite Anisotropic
StackStandard
Coil WindingUnipolar
Step Angle Degrees15°
Resolution Steps/Rev24
Starting Pulse Rate (pps)490
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)8
PF25-24D4 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )16
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)4.6
Rated Current (mAmps/Phase)288
Phase Inductance (mH +/-20%)3.6
Magnet MaterialNeodynium
StackStandard
Coil WindingUnipolar
Step Angle Degrees15°
Resolution Steps/Rev24
Starting Pulse Rate (pps)490
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)9
PF25-24P1 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )122
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)12.6
Rated Current (mAmps/Phase)103
Phase Inductance (mH +/-20%)66
Magnet MaterialFerrite Anisotropic
StackStandard
BipolarYes
Coil WindingBipolar
Step Angle Degrees15°
Resolution Steps/Rev24
Starting Pulse Rate (pps)490
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)10
PF25-24P4 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )122
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)12.6
Rated Current (mAmps/Phase)103
Phase Inductance (mH +/-20%)58
Magnet MaterialNeodynium
StackStandard
BipolarYes
Coil WindingBipolar
Step Angle Degrees15°
Resolution Steps/Rev24
Starting Pulse Rate (pps)490
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)10
PF25-24Q1 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )15
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)4.4
Rated Current (mAmps/Phase)293
Phase Inductance (mH +/-20%)7.9
Magnet MaterialFerrite Anisotropic
StackStandard
BipolarYes
Coil WindingBipolar
Step Angle Degrees15°
Resolution Steps/Rev24
Starting Pulse Rate (pps)490
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)10
PF25-24Q4 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )15
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)4.4
Rated Current (mAmps/Phase)293
Phase Inductance (mH +/-20%)7
Magnet MaterialNeodynium
StackStandard
BipolarYes
Coil WindingBipolar
Step Angle Degrees15°
Resolution Steps/Rev24
Starting Pulse Rate (pps)490
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)10
PF25-48C1 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )104
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)12.5
Rated Current (mAmps/Phase)120
Phase Inductance (mH +/-20%)37
Magnet MaterialFerrite Anisotropic
StackStandard
Bipolar
Coil WindingUnipolar
Step Angle Degrees7.5°
Resolution Steps/Rev48
Starting Pulse Rate (pps)790
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)10
PF25-48C4 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )104
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)12.5
Rated Current (mAmps/Phase)120
Phase Inductance (mH +/-20%)32
Magnet MaterialNeodynium
StackStandard
Bipolar
Coil WindingUnipolar
Step Angle Degrees7.5°
Resolution Steps/Rev48
Starting Pulse Rate (pps)790
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)12
PF25-48D1 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )16
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)4.6
Rated Current (mAmps/Phase)288
Phase Inductance (mH +/-20%)5
Magnet MaterialFerrite Anisotropic
StackStandard
Bipolar
Coil WindingUnipolar
Step Angle Degrees7.5°
Resolution Steps/Rev48
Starting Pulse Rate (pps)790
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)10
PF25-48D4 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )16
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)4.6
Rated Current (mAmps/Phase)288
Phase Inductance (mH +/-20%)4.4
Magnet MaterialNeodynium
StackStandard
Bipolar
Coil WindingUnipolar
Step Angle Degrees7.5°
Resolution Steps/Rev48
Starting Pulse Rate (pps)790
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)12
PF25-48P1 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )122
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)12.6
Rated Current (mAmps/Phase)103
Phase Inductance (mH +/-20%)81
Magnet MaterialFerrite Anisotropic
StackStandard
BipolarYes
Coil WindingBipolar
Step Angle Degrees7.5°
Resolution Steps/Rev48
Starting Pulse Rate (pps)790
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)12
PF25-48P4 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )122
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)12.6
Rated Current (mAmps/Phase)103
Phase Inductance (mH +/-20%)71
Magnet MaterialNeodynium
StackStandard
BipolarYes
Coil WindingBipolar
Step Angle Degrees7.5°
Resolution Steps/Rev48
Starting Pulse Rate (pps)790
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)13
PF25-48Q1 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )15
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)4.4
Rated Current (mAmps/Phase)293
Phase Inductance (mH +/-20%)9.7
Magnet MaterialFerrite Anisotropic
StackStandard
BipolarYes
Coil WindingBipolar
Step Angle Degrees7.5°
Resolution Steps/Rev48
Starting Pulse Rate (pps)790
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)12
PF25-48Q4 Rotary Tin Can Steppers Motors
Phase Resistance (Ω +/-7%@20°C )15
Motor Diameter (mm)25
Rotor Inertia (g-cm2)1
Weight (g)35
Phases2
Step Accuracy+/-5%
Insulation ClassE
Temperature Rise (C)70° C
Operating Ambient Temp-10°C to +50°C
Operating Rel Humidity20% - 85% (non-condensing)
Storage Ambient Temp-30°C to +80°C
DutyContinuous
RoHSYes
Rated Voltage (VDC)4.4
Rated Current (mAmps/Phase)293
Phase Inductance (mH +/-20%)8.5
Magnet MaterialNeodynium
StackStandard
BipolarYes
Coil WindingBipolar
Step Angle Degrees7.5°
Resolution Steps/Rev48
Starting Pulse Rate (pps)790
Slewing Pulse Rate (pps)900
Holding Torque (mNm +/-12%)13