Videos

Two Linear Servo Motors can be used in parallel using only one encoder, one driver, and one controller.

This video highlights the Linear Servo Motor's ability to be used in harsh environments as a result of its non-critical air gap. Here, iron filings are attracted to the shaft, but do not impede the motor's ability to run at ...

This video shows the S160D Linear Servo Motor with four forcers. As you can see, four different movements can be achieved with one shaft because each forcer can be controlled and driven by its own electronics.

This video shows a multi-drive system that uses one Linear Servo Motor (S080D-200) with two forcers. Each forcer performs its own movements. In this video, the two forcers move toward each other, grab a sample tube and shift it to ...

Two PFL35-48P4-120 LINEARSTEP® motors are used to demonstrate a sample X-Y system setup.

A Nippon Pulse PFCL25-48C4-120 LINEARSTEP® motor drives a pump to aspirate and dispense a liquid. A Linear Servo Motor can be seen on the left (Z-axis) actuating the tubing into the liquid.

Nippon Pulse has been manufacturing steppers motors since 1952 and offers them as a high-performance, low-cost solution. In addition to these motors, Nippon Pulse also offers gearhead, hybrid, and synchronous stepper motors.

In this video, Nippon Pulse stepper motors are configured into a fluid-dispensing syringe application. The unit is driven by linear stepper motors as well as hybrid stepper motors. The device can be programmed to perform a wide array of motion ...

This video highlights three Nippon Pulse stepper motors (PF55, PFCL35, PF25) in use together as a three-axis demo. The unit can be used in a wide range of applications including medical stirring applications. With minor modifications, the unit can also ...

The SCR stage includes Nippon Pulse's Linear Servo Motor and contains all encoder and motor cables within the stationary base. The stage is designed so there is no need for the cables to bend or flex.

LINEARSTEP® Gripper Application One common lead screw shaft and two PFCL25-48P4-96 LINEARSTEP® motors operate as a gripper, grabbing a plastic sample tube. The tube is placed on a holder and a tin-can stepper motor (PFCU25-48 with gearhead) drives up and ...

The Nippon Pulse SCR Nanopositioning stage series offers the accuracy of piezo driven stages with the speed and performance of servo stages. Integrated with a cross-roller guide, the SCR stage produces extremely accurate results with no loss of stability. View ...