Product Catalog

Motors

Linear Servo Motor
Linear Servo Motor
Browse
Learn More

Nippon Pulse’s Linear Shaft Motor is a brushless, high-precision direct drive linear servo motor with a tubular design. The motor consists of a magnetic shaft and coil assembly (forcer), and is driven and controlled by the flow of current.

The Linear Shaft Motor can replace ball-screws, pneumatics, U-shaped motors and other linear motion systems.

Design Concepts of the Linear Shaft Motor

  • Simple: Two parts and a non-critical air gap
  • Non-Contact: No wearing and maintenance free
  • High Precision: Ironless design and all the magnetic flux is used

Linear Shaft Motor Specification Overview

  • Variety of shaft diameters, ranging from 4mm to 100mm
  • Stroke lengths of 20mm to 4.6M
  • Achievable peak force of 2340N
  • Maximum continuous force of 585N
Tin-Can Stepper Motors
Tin-Can Stepper Motors
Browse
Learn More

Rotary Stepper Motor Since 1965

Nippon Pulse’s steppers offer a conventional, magnet-driven rotary stepper motor that is both high-performance and cost-efficient. Nippon Pulse has been manufacturing the rotary stepper motor since 1965.

Product Features of the Stepper Motor

  • Several customization options are available on all tin-can steppers
  • Prototyping within 24 hours
  • Any of our standard series motors can be customized to meet the unique needs of your application
Linear Stepper Motors
Linear Stepper Motors
Browse
Learn More

Nippon Pulse’s linear stepper motors are designed to provide a simple, tin-can linear actuator at a fraction of the cost of a conventional rotary-to-linear stepper system. Nippon Pulse’s LINEARSTEP® tin-can linear actuators have multiple customization options available.

Linear Stepper Motor Product Sizing

  • Offered in diameters of 25mm and 35mm
  • Can also be ordered with one of three thread pitches on the lead screw (0.48mm, 0.96mm, and 1.2mm)
  • Linear stepper motors can be ordered with unipolar or bipolar windings and with a variety of usable voltages
Synchronous Motors
Synchronous Motors
Browse
Learn More

Nippon Pulse’s synchronous motors are constant speed, permanent magnet motors. These motors are perfect for timing applications.

Design Concepts of Synchronous Motors

  • Available in both single direction (shaded pole design) and reverse direction (phase-shift by capacitor)
  • Built with internal impedance protection, so the shaft can be continuously stalled without danger of burning the coils
  • A wide variety of plastic and metal gear heads are available on all models
Rotary Hybrid Stepper Motors
Rotary Hybrid Stepper Motors
Browse
Learn More

Nippon Pulse’s PJP Series motor is ideal for motion control applications where the benefits of smaller size with high torque are essential. They feature superior response characteristics and function in a wide variety of applications.

Hybrid Stepper Motor Product Sizing

  • Available in sizes from 28mm (NEMA size 11) to 56mm (NEMA size 23)
  • Unipolar windings are standard, and bipolar windings are available by request
  • Ideal for automation, document processing, printing/copying/sorting, chart recording/plotting, rotary positioning, and robot gripping applications
Linear Hybrid Stepper
Linear Hybrid Stepper
Browse
Learn More

Nippon Pulse’s linear hybrid stepper motors feature superior response characteristics, and include an integral lead screw or ball screw for converting rotary motion into linear motion.

Our linear hybrid stepper motors are ideal for a wide variety of applications, including medical devices, microtiter tables, fluid dispensers, semiconductor wafer handling machines, optical systems, and data storage machines.

Stages

SCR Linear Stage
SCR Linear Stage
Browse
Learn More

The Nippon Pulse Linear Shaft Motor Nanopositioning stages offer the accuracy of piezo driven stages with the speed and performance of servo stages.

SCR Linear Shaft Motor Stage Features

  • Produces extremely accurate results with no loss in stability
SLP Linear Stage
SLP Linear Stage
Browse
Learn More

Nippon Pulse’s linear stages offer technology that is unmatched in the industry. Our Acculine Series offers high-precision stages for industrial applications.

SLP Linear Shaft Stage Features

  • As an all-inclusive stage, the SLP stage provides integrated linear shaft support within the housing
  • Simplifies the transition from conventional ball-screw systems
  • There are no stages on the current market that match the SLP series' force-to-volume ratio, making it an outstanding solution for those with space limitations
  • Smaller deadzone than every similar product available

Controllers

Chip Level Controllers
Chip Level Controllers
Browse
Learn More

Nippon Pulse’s programmable pulse generators are motion control chips that are designed to control stepper motors and servomotors. These chips reduce the computational burden on the system’s microprocessor while allowing for a wide array of advanced motion control features.

System Highlights

  • The easily programmable registers allow design engineers to create sophisticated motion profiles
  • A number of  models with max output frequencies ranging from 400Kpps up to 15 Mpps

Applications

  • The major applications for PCL/PCD series chips are semiconductor manufacturing and inspection equipment, robots, analyzers, medical examination equipment, automatic handling machines, and printers/office equipment.

Legacy/Obsolete Products

Some of the products Nippon Pulse has offered in the past are no longer supported or available. A complete list of these can be found on the Legacy/Obsolete Product page. If your application is currently utilizing a product that is no longer available, contact one of our applications engineers for assistance in choosing an alternative product that will meet your needs.

Board Level Controllers
Board Level Controllers
Browse
Learn More

Nippon Pulse offers motion control boards for stepper motors and servomotors. These boards employ several different CPU interfaces and have features that fit different applications.

Contact Nippon Pulse’s applications engineers to help you find the right board for your project.

Board Features

PPCI7443

  • Nippon Pulse’s PPCI7443 is an advanced PCI-bus format 4-axis control board for stepper motors and servomotors
  • This board boasts a compact design with all of the advanced motion control features of the integrated PCL6045 chip
  • Comes with user-friendly software that incorporates MS-DOS, C/C++ programming library, Windows 95/98/ME/NT/2000 DLL, and a test monitor

PPCIe8443

  • Nippon Pulse’s PPCIe8443 is a PCI-Express interface 4-axis control board for stepper and servo motor control
  • Equipped with PCL6046 pulse control LSI for linear, circular and continuous interpolation, linear/S-curve acceleration and velocity/position override
  • Comes with utility software for application development and ease of system debugging, as well as function libraries, definition files, and sample programs

NPMC6045-4104

  • Nippon Pulse’s NPMC6045A-4104 is an advanced PC/104-bus format 4-axis control board for stepper motors and servomotors
  • This board boasts a compact design with all of the advanced motion control features of the integrated PCL6045 chip
  • Comes with a user-friendly C language library

FMC32

  • Nippon Pulse’s FMC32 is a single-axis controller with integrated bipolar chopper drive for stepper motors
  • This board allows users to register up to 32 operation patterns and 256 execution sequences and store them internally on non-volatile memory for standalone operation
  • Features the PCD2112 controller chip, allowing users to save programs via a USB-to-4-wire serial conversion unit

Legacy/Obsolete Products

Some of the products Nippon Pulse has offered in the past are no longer supported or available. A complete list of these can be found on the Legacy/Obsolete Product page. If your application is currently utilizing a product that is no longer available, contact one of our applications engineers for assistance in choosing an alternative product that will meet your needs.

Motion Checker Controllers
Motion Checker Controllers
Browse
Learn More

Nippon Pulse’s Motion Checker controllers are palm-sized controllers with an integrated driver circuit for 2-phase stepper motors.
 

System Design (MCH-5 Motion Checker Units)

  • Both unipolar and bipolar stepper versions
  • Available pulse/direction output signals that enable you to use MCH-5 as standalone controllers for any external stepper motor driver board
  • Available input ports for external signals, including end limit and home/origin switches and external start/stops
  • Include non-volatile memory that can save up to six different motion profiles

Drivers

Board Level Drivers
Board Level Drivers
Browse
Learn More

Nippon Pulse offers driver boards for unipolar and bipolar stepper motors. These driver boards are designed to drive 2-phase stepper motors, and feature a variety of excitation modes.

System Configuration

  • AD1111 and AD1131 are a constant voltage driver for unipolar steppers
  • AD1231 is a constant current driver for unipolar steppers
  • AD1431 is a constant current driver for bipolar steppers

Legacy/Obsolete Products

Some of the products Nippon Pulse has offered in the past are no longer supported or available. A complete list of these can be found on the Legacy/Obsolete Product page. If your application is currently utilizing a product that is no longer available, contact one of our applications engineers for assistance in choosing an alternative product that will meet your needs.

Speak with a Nippon Pulse Application Engineer

Our application engineers can help you decide what motion control solution will work best for your application.

Contact Us Form

1-540-633-1677

info@nipponpulse.com